An IGT configuration BOM should identify exactly which parts make up the product offered to a buyer. A bill of materials connects the base table, included panels, accessories, instructions and packing to one configuration revision. It is not evidence that the listed parts are compatible.
This article provides a blank commercial configuration template. It is not an engineering drawing, an actual ONWAY product combination or an approved kitchen setup. Populate it only with identified components whose intended combination has been reviewed.
Start with the parent configuration
Assign a reference to the sellable package and record its revision. Define the included items in words before building the table: base frame, required panels, supplied hardware, bag and instructions, for example. A lifestyle image may show optional props; the BOM should make that distinction explicit.
Keep product-family names separate from orderable configurations. Two packages using the same frame may include different parts and need different item lists, packing instructions and customer-facing descriptions.
Use child references for each component
Give each component an identifiable reference and revision, plus its quantity in the parent package. Record whether it is mandatory, optional or shown only for context. Avoid ambiguous descriptions such as “standard insert” when more than one revision could be supplied.
Where a part comes from another source, record that reference without assuming interchangeability. Use the compatibility checklist to document the fit and intended-use review separately.
Blank configuration BOM
| Parent configuration / revision | Child reference / revision | Description | Quantity | Status | Verification reference |
|---|---|---|---|---|---|
| To assign | To assign | Base frame | To confirm | Mandatory / optional | To supply |
| Same parent | To assign | Top or insert | To confirm | Mandatory / optional | To supply |
| Same parent | To assign | Connector or support, if required | To confirm | Mandatory / optional | To supply |
| Same parent | To assign | Hardware, instructions or other included item | To confirm | Mandatory / optional | To supply |
| Same parent | To assign | Bag and packing components | To confirm | Mandatory / optional | To supply |
The rows are placeholders, not a recommended component combination. Leave a part unresolved until its reference, quantity and inclusion status are confirmed.
Map the BOM to packing and replacement parts
Add a carton or bag reference for each component. Identify whether hardware is attached, separately bagged or supplied with another assembly. Record the packing-list revision and ask for packed dimensions and weight for the actual package rather than summing unrelated catalogue values.
For after-sales planning, distinguish the sellable package from parts that can be ordered separately. Ask which replacement references are available and which revisions they cover. Do not label a part universal merely because its appearance matches.
Control optional combinations
An optional accessory should have a documented applicability reference, not just a marketing checkbox. State the supported configuration, required additional parts and any unresolved limitations. If an appliance is involved, physical fit alone does not establish approved operation; the relevant manufacturers’ instructions and appropriate review remain necessary.
The modular kitchen planning guide helps separate functions, component groups and purchase questions. Keep that concept plan linked to the exact BOM revision approved for ordering.
Release and revise the configuration deliberately
Before release, compare the sample contents, instructions, packing list, quotation scope and customer-facing included-items list. Resolve discrepancies rather than choosing whichever document is most convenient.
For a later substitution, record the changed child reference, affected parent configurations and required review. Retain the prior revision so previously supplied packages can still be identified. Do not overwrite the old list without recording what changed.
Browse IGT table formats, then send your proposed configuration list. Include the intended market, required functions and any compatibility or packing questions still open.
Frequently asked questions
What is the difference between a parent and child SKU in this template?
The parent identifies the sellable configuration; child references identify its components. Keep quantities, revisions and inclusion status explicit for each part.
Does a completed BOM prove IGT compatibility?
No. A BOM identifies parts. Compatibility and intended-use evidence must be reviewed separately for the exact components and revisions.
How should optional accessories be listed?
Mark them as optional, identify their revisions and supported configurations, and state any required additional parts. Do not include them silently in the base package.
What should happen when a component is substituted?
Record the changed reference and affected configurations, review fit and other applicable requirements, and update the controlled package documents while retaining prior revisions.